Download the STL design files plus instructions to print up to 10 cases for the Digital Carb Sync. Upload to your 3D printer or online service.
License terms apply.
Purchaser is granted personal use of the design files for the production of no more than ten 3D Digital Carb Sync cases described herein. Purchaser agrees to never reproduce, publish, or distribute the design files for the Digital Carb Sync 3D case. License grantees agree to pay $5,000 USD for each violation, and each subsequent violation enabled by the licensee’s acts or omissions.
It is set up for 4 cylinders with 2 knock-out tabs for a 6 cylinder device. There are knock-out tabs on the side to accommodate different styles of USB plugs. There is a storage area for an optional 9-volt battery that is separate from the electronics to prevent corrosion damage from an old battery. We use a cable from the bike for power; it can also be powered via the USB plug. It perfectly fits the standard build. The inside supports can be sanded to allow for custom variations.